Mitsubishi Electric Melsensor CF26-LR, Settings Manual

Page: 4 / 112

2
[Wiring Precautions]
[Startup and Maintenance Precautions]
[Disposal Precautions]
PRECAUTIONS FOR USE
Observe the following precautions when installing and operating the code reader, to reduce the risk of injury or equipment
damage:
• This device requires the use of an LPS or NEC class 2 power supply.
• To reduce the risk of damage or malfunction due to over-voltage, line noise, electrostatic discharge (ESD), power surges, or
other irregularities in the power supply, route all cables away from high-voltage power sources.
• A code reader does not contain user-serviceable parts. Do not make electrical or mechanical modifications to a code
reader.
Unauthorized modifications may void your warranty.
• Changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user's
authority to operate the equipment.
• If the bend radius or service loop is smaller than 10 times of the cable diameter, the cable may cause cable shielding
degradation, cable damage, or wear out in a short period. The bend radius must begin at least 152.4 mm from the
connector.
• Use this device in accordance with this manual.
CAUTION
● Use only 24 VDC and observe the indicated polarity. Otherwise, fire or damage may result.
CAUTION
● Do not clean the code reader with highly irritating or corrosive solvent such as caustic alkali solution,
methyl ethyl ketone (MEK), and gasoline. Doing so may cause a fault.
CAUTION
●
When disposing of this product, treat it as industrial waste.