Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, User Manual

Page: 102 / 248

100
10 SETTING PARAMETERS
10.2 Setting Network Parameter
Network type and mode
The following explains network types and modes of parameter.
Network type
The following types can be selected.
Mode
Selectable items for the mode are different depending on the network type.
■
Master station
The following modes can be selected.
For the differences in cyclic transmission between "Online (Normal Mode)" and "Online (High Speed Mode)", refer to the
following section.

Page 218 Differences in Cyclic Transmission Modes
■
Local stations
The following modes can be selected.
Item Description
CC IE Field (Master Station) Use as a master station in the CC-Link IE Field Network.
CC IE Field (Local Station) Use as a local station in the CC-Link IE Field Network.
Item Description
Online (Normal Mode) This mode performs cyclic transmission and transient transmission without losing their inherent speed performance.
This mode is suitable for a system that performs I/O control and analog control, and transmits large amount of data for
management, monitoring, and diagnostics by transient transmission. Use this mode for general applications.
Online (High Speed Mode) This mode preferentially performs cyclic transmission for high-speed communications. This mode is suitable for a
system to achieve I/O control, analog control, and digital I/O at high speed.
Note that the maximum points assigned to RWw/RWr is 256 points per local station.
In this mode, the processing speed of transient transmission is slower than that in "Online (Normal Mode)"
Offline Select this mode to disconnect the station from the network for stopping data link with other stations.
Item Description
Online Select this mode to connect the station to the network for performing data link with other stations.
Offline Select this mode to disconnect the station from the network for stopping data link with other stations.