Mitsubishi Electric MELSEC iQ-F Series, User Manual

Page: 52 / 190

50
4 SYSTEM CONFIGURATION
4.1 Rules of System Configuration
Limitations when using extension devices
■
Modules of extension connector type
FX5-CNV-IF is required to use modules of extension connector type.
■ Limitations on intelligent function modules
Note that some intelligent function modules have limitations on the number of modules, order and combination in which they
are added for each individual module.
■
Using the extended extension cable
The connector conversion adapter is required when the extended extension cable connection destination is a module of
extension cable type (except for FX5-1PSU-5V or extension power supply module).
Model Limitations
FX5-ENET Only one module may be connected per system.
FX5-ENET/IP Only one module may be connected per system.
FX5-CCLIEF Only one module may be connected per system.
FX5-CCL-MS One module can be connected to the system for each station type.
• Master station: 1
• Intelligent device station: 1
FX5-ASL-M Only one module may be connected per system.
FX5-DP-M Only one module may be connected per system.
FX5-40SSC-S Only one module may be connected per system.
Use together with the FX5-80SSC-S is not possible.
FX5-80SSC-S Only one module may be connected per system.
Use together with the FX5-40SSC-S is not possible.