Mitsubishi Electric MELSEC iQ-F FX5UC Series, User Manual

Page: 160 / 282

158
12 INSTALLATION
12.3 Method for Connection of Extension Devices
Connection of an extension module (extension connector type)
This subsection describes how to connect the extension module (extension connector type).
A connector conversion module is required to connect an extension connector type module to an FX5UJ CPU module system
and an FX5U CPU module system.
1.
Slide the extension module joint levers (A in the figure)
of the existing module (left side).
2.
Remove the extension connector cover (B in the figure).
3.
Connect the extension module as shown in the left
figure.
4.
Slide the extension module joint levers (A in the figure)
of the existing module to fix the extension module (C in
the figure).
FX5UJ FX5U FX5UC FX5S
A
A
B
A
4 4
4 4
3
3
3
A
C