Mitsubishi Electric MELSEC iQ-F FX5UC Series, User Manual

Page: 134 / 282

132
6 I/O MODULE PERFORMANCE SPECIFICATIONS
6.5 High-Speed Pulse Input/Output Module
6.5
High-Speed Pulse Input/Output Module
Extension cable type
*1 Current consumption when external power supply is used for the input circuit.
Item Specifications
FX5-16ET/ES-H FX5-16ET/ESS-H
Current
consumption 5VDC 100mA
24VDC 125mA (85mA
*1
)
Mass (weight) Approx. 0.25kg
External color Munsell 0.6B7.6/0.2
■ Input specifications
Number of input points 8 points
Connection type Screw terminal block (M3 screws)
Input type Sink/source
Input signal voltage 24VDC +20%, -15%
Input signal current 5.3mA/24VDC
Input impedance 4.3k

Input sensitivity
current On 3.5mA or more
Off 1.5mA or less
Input response frequency • X0 to X5: 200kHz
• X6, X7: 10kHz
Input response time On • X0 to X5: 2.5

s or less
• X6, X7: 30

s or less
Off • X0 to X5: 2.5

s or less
• X6, X7: 50

s or less
Input signal format (Input sensor
form) No-voltage contact input
Sink: NPN open collector transistor
Source: PNP open collector transistor
Indication of input operation LED turns on when input is on.
■
Output specifications
Number of output points 8 points
Connection type Screw terminal block (M3 screws)
Output type Transistor/sink output Transistor/source output
External power supply 5-30VDC
Indication of output operation LED turns on when output is on.
Max. load 0.5A/point
The total load current of resistance loads per common terminal should be the following value.
• 4 output points/common terminal: 0.8A or less
• 8 output points/common terminal: 1.6A or less
Open circuit leakage current 0.1mA/30VDC
Min. load

Response time Off

On • Y0, Y1, Y4, Y5: 2.5

s or less/10mA (at 5-24VDC)
• Y2, Y3, Y6, Y7: 0.2ms or less/200mA (at 24VDC)
On

Off • Y0, Y1, Y4, Y5: 2.5

s or less/10mA (at 5-24VDC)
• Y2, Y3, Y6, Y7: 0.2ms or less/200mA (at 24VDC)
Voltage drop when ON 1.5V or less (Y0, Y1, Y4, and Y5: 1.0V or less)