Mitsubishi Electric MELSEC FX2N-32DP-IF, Hardware Manual

Page: 16 / 54

FX2N-32DP-IF Profibus-DP Interface Unit Introduction 1
1-6
1.3.1 Connected Monitoring Tools
An FX-20P-E or personal computer can be used to monitor the 32DP-IF and the data
exchanged with the Profibus. For operating instructions of the FX-20P-E or personal computer,
refer to their respective operation manuals. For device numbers and explanation, refer to the
FX
2N
-32DP-IF User’s Manual.
Connecting cable is same as FX
2N
MPU.
Note;
For monitoring the 32DP-IF with a personal computer the PLC setting must be adjusted as
for the FX series PLC type.
Table 1.2: Connected Programming Tools
Monitoring Tools Description
FX-20P-E
Device monitor
Personal Computer
(MELSEC MEDOC PLUS)