27 / 47
JEP0-IL9537
4.6. Change Relay Element Setting [SETTING]
The new setting of the relay element can be changed
by “SETTING” function.
Set position 7
(Setting)
When the password is set, input the password to enter the setting mode.
Go to clause 4.6.1.
When the password isn’t set, go to clause 4.6.2 ~ 4.6.8.
4.6.1. Under Protection by Password
When the password is set, input the password to enter the setting mode.
If using no password, following operation can be passed.
How to set password shows sub-clause 4.6.8.
(1)
Input Password
When the password lock
is enabled, “000” is
indicated.
The blinking LED shows
the operated digit.
You can change the
figure using Switch-4.
Summary of Contents for MELPRO CBV2 -A02S1
Page 46: ...46 47 JEP0 IL9537 ...
Page 47: ...47 47 JEP0 IL9537 ...