12
5.2.
Re-setup using a recovery medium
This section describes re-setup using a recovery medium.
If you installed Edgecross basic software and SLMP data collector by mistake, you can re-
install them by using each installation file stored in the following folders.
Edgecross basic software:
C:\Recovery_Media\BasicSoftware
SLMP data collector:
C:\Recovery_Media\DataCollector\SLMP
If you erased these installation files, set up again by using the recovery medium.
5.2.1.
Re-setup flow
Set up the operating system again according to the flowchart below and by referring to this manual.
Preparation for re-setup (5.2.2)
Changing the BIOS setting (5.2.3)
Installing Windows 10 (5.2.4)
Initial setting (5.1.1)
Setup complete
