English
English-11
6. Operate the attached external equipment
Display the signal on the external equipment you wish.
7. Adjust the sound
Make adjustments lowering or rising the volume as required.
8. Adjust the screen (See pages 23-31)
Make adjustments to the display position or settings if re-
quired.
9. Adjust the image (See page 23-31)
Make adjustments to brightness or contrast if required.
10. Recommended Adjustment
To reduce the risk of “image persistence”, please adjust
the following items based on the application being used.
“POWER SAVE” (See page 26), “SCREEN SAVER” (See
page 26), “SIDE BORDER COLOR”(See page 26), “DATE
AND TIME” (See page 29), “SCHEDULE”(See page 29).
11. Installing and removing the stands
The stands are prepared as option.
How to install the stands
1. Please turn monitor off.
2. After inserting stand in guide block, fasten Thumbscrews
on both sides of the monitor.
NOTE:
Install the stands so that their longer portions come to the
front.
How to remove the stands
1. Spread the protective sheet on the
fl
at surface, such as a
desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
safe place for reuse.
Screws
Stands
Longer portion
comes to the
front.
12. To prevent the main power switch
from being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE:
With the main power switch cover in place, the main power
switch can not be turned off. Remove main power switch
cover in order to switch off the display.
13. Connecting HDMI cable
Screws
Main switch cover
Clamper
Cable Holder
Use the clamper
to secure the
cable firmly.
