Mitsubishi Electric LAN UNIT, Technical Manual

Page: 16 / 20

- 13 -
[12] Specification
Basic specifications
access point
MITSUBISHI LIMI Servo
XC-G series
Mitsubishi electronic pattern sewing
machine
PLK-G series
Connected equipment
XC-G series control box
Control switch panel
PLK-G series control box
(System ver.S100W018 or later)
power supply
DC12V
(Supplied from the control box)
DC12V
(Supplied from the control box)
Communication interface
Ethernet communication (1 port)
RS232C serial communication (2 port)
USB communication (2 port)
External storage medium USB flash drive
External input / output
CON C
Input 4 point (analog 2 point), Output 3 point (analog 1 point), total 7 point
External dimensions 125mm(W)
×
155mm(D)
×
40mm(H)
Mass 300
ｇ
Ethernet
communication
Communication standard 10BASE-T/100BASE-TX
Interface RJ-45 connector 1 port
Communication speed 100Mbps
Supported protocol CC-Link IE Field Basic
IP address Write from USB flash drive
･
Ethernet is a trademark of Xerox Corporation.
･ The company name and the product name to be described in this manual are registered trademarks or
trademarks of each company.