background image

English

Français

NA 

-

 1

This product is intended for the purpose of drying hands and is not covered by the warranty if used for any other purpose. 
It has no sterilizing or disinfecting functions.

Input Power: 120 Vac Single-phase

Indoor use only

1

You should not attempt to install the unit yourself, as this may affect the safety and functionality of the unit.

INSTRUCTION MANUAL

For User 

Hand dryer

 Read this manual thoroughly before use to ensure the unit is used safely and correctly. 
After reading the manual, store it in an easily accessible location for future reference. 

INDEX
Safety Precautions 

………………………………………………

2

Names of Parts 

………………………………………………………

3

How to use the unit 

………………………………………………

3

 Turning the power on 

………………………………………………

3

After washing hands 

…………………………………………………

3

If not using for a long period 

………………………………………

3

Maintenance 

………………………………………………………

4

1. Cleaning the unit and hand drying area 

…………………

4

2. Cleaning the air fi lter 

………………………………………

5

3. Draining and cleaning the drain tank 

………………………

5

4. Cleaning the drain pipe 

……………………………………

6

If you think something has gone wrong 

………………………

7

Specifi cations 

……………………………………………………

8

Drying times for different modes (approximate) and uses 

………

8

1606876HE3501

MODEL

JT-SB116JH2-W-NA

JT-SB116JH2-S-NA

Model Name 

display position. 

Power voltage 

display position. 

Unit color

-W 

(White),  

-S 

(Silver)

Summary of Contents for JT-SB116JH2-S-NA









Reviews: