background image

4

4

3

2

1

Turn the ground

-

fault circuit interrupter "ON". 

The power light (blue) turns on.

After washing hands 

How to use the appliance 

Insert hands from the side 

Bring hands upwards

Wet hands 

Repeat 2

-

3 times

If not using for a long period 

Turn the ground

-

fault circuit interrupter "OFF".

 

Simple heater

  

JT

-

SB216JSH2 type only (not applicable to JT

-

SB216KSN2)

Softens the feeling of cold air. 

If the room temperature is above 30

º

C, the heater will stop working to prevent the temperature from 

rising too high. 

 

Automatic Stop Function 

  

All models 

The power lamp flashes and the dryer stops automatically if the appliance is used continually for more than  

30 seconds. To continue using the hand dryer, remove your hands, and then re

-

insert them. 

NOTE

If the room temperature is less than 18ºC, the air may feel cold. 

Caution

Do not turn the power on when your hands or an object are inside the hand drying area.

The sensitivity of the sensor may be reduced if the power is turned on while your hands or objects are 
inside the hand drying area.
If the sensitivity of the sensor is reduced, please turn the power off and then back on after one minute.

Summary of Contents for Jet Towel JT-SB216JSH2














Reviews: