Mitsubishi Electric iMode M341i Owner'S Manual Download Page 50

Page: 50 / 80

50-

i-mode

Compact NetFront is a registered trademark or trademark of Access Co. Ltd.

in Japan and selected countries worldwide.

our mobile allows you to access dedicated i-mode web sites and webpages

thanks to the i-mode standards. You can for instance send and receive e-mails

and MMS, connect to i-mode sites and download images and 32 tone melodies for

your mobile (see setting an image as a main screen, a welcome screen or a good-

bye screen from the pictures folder, page 44, welcome screen, page 62, goodbye

screen, page 62).

Access to the i-mode is network dependent. Please contact your service provider for

full details about subscription conditions. To be able to use the i-mode features on your mobile, you

must have a GPRS subscription.

USER

INTERFACE

Whilst navigating the i-mode menu, please note that the up, down, left and right ar-

row keys allow you to access further settings or fields to be filled in, as well as valida-

tion and cancellation options (Ok, Cancel, Send, Save, etc.).

Scroll up or down to highlight (blue highlighting) the correct field, select an op-

tion or enter text. Depending on the menu you are in, you may have to scroll

down many times until you reach the correct option.

i-mode

MENU

This section describes access to the i-mode lock, i-mode profiles and New mail alert.

To access these features:

i-mode

LOCK

The purpose of this feature is to lock access to all i-mode features, thereby protecting your mo-

bile from any unauthorised operation.

i-mode

PROFILES

To use the i-mode and connect to i-mode webpage, you must first need define and store the

profile details, then select the required i-mode profile.

NEW

MAIL

ALERT

This sub-menu allows you to define the alert melody that is played on new incoming mail or MMS.

Press

Select

i-mode

Press

Select

i-mode

Select

i-mode lock

Select

lock

Enter your 4 digit i-mode lock code and select

1. The default i-mode lock code is 0000. To change the code, select Change lock code instead of lock and follow the

instructions displayed.

2. Mail reception is not affected by the i-mode lock. However it does not allow you to read the e-mails received.

Press

Select

i-mode

Select

i-mode profiles

Select one of the available profiles and select

Options

(left softkey).

Select

Select

Summary of Contents for iMode M341i

















































































Search results

Summary of Contents for iMode M341i

Reviews:

Brands by name

Popular brands

Mitsubishi Electric iMode M341i, Owner'S Manual

Search results

Summary of Contents for iMode M341i

Reviews:

Brands by name

Popular brands