EN-33
FEATURE menu
AUTO
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
REMOTE POSITION
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
DISPLAY
INPUT
1.
MENU DIMMER
OFF
FEATURE
PASSWORD
FUNCTION
ITEM
SETTING
FUNCTION
ASPECT
AUTO
Select to change the aspect ratio automatically depending on the input
signal.
4:3
Select to project images with an aspect ratio of 4:3.
16:9
Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1
Select to enlarge and project images of CinemaScope size.
ZOOM2
Select to enlarge and project images of Vista size.
STRETCH
Select to enlarge to 16:9 and project of the images with an aspect ratio of
4:3. (Non-linearly stretched.)
ANAMORPHIC1
This mode is suitable for viewing 2.35:1-size images using the anamorphic
lens.
Use the
p
or
q
key to adjust the vertical display position.
This mode doesn’t support input signals from personal computers.
ANAMORPHIC2
This mode is suitable for viewing 16:9- or 4:3-size images or images input
from personal computers using the anamorphic lens.
PASSWORD FUNCTION
2 options
Use to enable or cancel the password lock. See page 41 for details.
MENU POSITION
2 options
Use to change the position of the menu.
MENU DIMMER
ON / OFF
Use to reduce the brightness of the menu.
CINEMA MODE
AUTO
The film mode will be automatically activated when a film source signal is
input.
Select AUTO for normal use.
When flicker occurs on the screen or jaggies on slanting lines are
remarkable, select FILM when a film source signal is input or select VIDEO
for other signals.
VIDEO
The film mode will not be activated.
FILM
Fixed to the film mode.
REMOTE POSITION AUTO / FRONT /
REAR
Sets the position of remote infrared receiver to front or rear.
LANGUAGE
10 languages
Use to select the language used in the menus.
RESET ALL
OK
Use to reset the settings of the menu (excluding PASSWORD FUNCTION,
LANGUAGE, and NETWORK) to the factory setting values.
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE (2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
Menu operation (continued)