background image

EN-3

Contents

Declaration of Conformity

Model number:  

HC1500

Trade name:  

MITSUBISHI ELECTRIC 

Responsible party: 

Mitsubishi Digital Electronics America, Inc.

 

9351 Jeronimo Road, Irvine, CA 92618 U.S.A

Telephone number:  +1-(949) 465-6000

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may cause undesired operation. 

Important safeguards ........................................................................................................................4

Preparing your projector ....................................................................................................................6

Using the remote control ...................................................................................................................9

Setting up your projector .................................................................................................................10

Viewing video images ......................................................................................................................13

Viewing computer images ...............................................................................................................20

Menu operation ...............................................................................................................................23

Adjusting projected images .............................................................................................................27

Advanced features ..........................................................................................................................30

Replacing the lamp .........................................................................................................................31

Troubleshooting ...............................................................................................................................33

Indicators .........................................................................................................................................36

Specifi cations ..................................................................................................................................37

Trademark, Registered trademark

DLP™, Digital Micromirror Device, DMD and BrilliantColor™ are all trademarks of Texas Instruments.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI 
Licensing LLC. 
The “HD ready” logo is a trademark of EICTA.
Other brand or product names are trademarks or registered trademarks of their respective holders.

Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10
Information for users and Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components 
which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from 
your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product.

Please, help us to conserve the environment we live in!

Summary of Contents for HC1500








































Reviews: