Mitsubishi Electric GT16, User Manual

Page: 282 / 1306

15 - 34
15. DATA CONTROL
15.2 Various Data Control

Example of logging information display
POINT POINT POINT
(1) About the displayed file
The files other than that for logging are not displayed on the logging information screen.
(2) Folders and files displayed
For the folders and files displayed, refer to the following.
15.1.4 Display file
(1)
(8) (10) (11) (9)
(2)
(5)
(3) (4) (6) (7)
Number Item Description
(1) Drive The target drive can be selected. (Even if CF card is not installed, this message appears.)
(2) Check box If the check box is selected, up to 512 files can be selected.
(3) Kind
Indicates whether the displayed name is file or folder.
In case of file, displays the extension; in case of folder, displays "DIR".
(4) Name
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Rename] button, etc.
( 15.2.3 ■ Logging information operation (6)Rename operation)
After confirmation, touch the [Cancel] button to cancel the operation.
(5) Path name Displays the path name of drive/folder which is currently displayed.
(6) Size Displays the size of the file displayed in Name.
(7) Creating date & time The date and time when each file was created are displayed.
(8) Select all files/Cancel selection
Multiple files can be selected or canceled at once.
Touch the [Select all files] button to select all files.
If the number of the displayed files exceeds 513, the first 512 files are selected.
(9) Drive size Displays the used/entire size of drive selected by select drive.
(10) Operation switch Execution switch of each function.
(11) Number of folders and files Displays the total number of the displayed files and folders.