Mitsubishi Electric GT16, User Manual

Page: 1267 / 1306

62. MICROCOMPUTER CONNECTION (ETHERNET)
62.5 GOT Side Settings
62 - 65
60
CONNECTION T
O
MURA
T
E
C
CONTROLL
ER
61
MI
C
R
O
C
OMPUTER
CONNECTION (SE
R
IA
L)
62
MICR
OCOMPUTER
CONNECTION (E
T
HE
RN
E
T)
63
MO
D
B
US(R)/
R
T
U
CONNE
C
T
ION
64
MO
DBUS(R)/
TCP
CON
N
E
C
T
ION
65
V
NC(R) S
E
R
V
E
R
CONNECTION
62.5 GOT Side Settings
62.5.1 Setting communication interface
(Communication settings)
Set the channel of the equipment connected to the GOT.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Other
• Controller Type:Computer
• I/F: Interface to be used
• Driver: Ethernet (microcomputer)
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
62.5.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
62.5.2 Communication detail settings
Make the settings according to the usage environment.
2.
3.
4.
Click!
Item Description Range
GOT IP
address
*1
Set the IP address of the GOT.
(Default: 192.168.3.18) 0.0.0.0 to
255.255.255.255
Subnet
Mask
*1
Set the subnet mask for the sub
network. (Only for connection via
router)
If the sub network is not used, the
default value is set.
(Default: 255.255.255.0)
0.0.0.0 to
255.255.255.255
Default
Gateway
*1
Set the router address of the
default gateway where the GOT is
connected. (Only for connection via
router)
(Default: 0.0.0.0)
0.0.0.0 to
255.255.255.255
Ethernet
Download
Port No. Set the GOT port No. for Ethernet
download.
(Default: 5014)
1024 to 5010,
5014 to 65534
(Except for 5011,
5012 and 5013)
GOT
Communication
Port No.
Set the GOT port No. for the
connection with the Ethernet
module.
(Default: 5021) 1024 to 5010,
5015 to 65534
(Except for 5011,
5012 and 5013)
Startup Time
Specify the time period from the
GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
3 to 255sec
Delay Time
Set the delay time for reducing the
load of the network/destination
PLC.
(Default: 0ms)
0 to 10000
(
10 ms)
32bit Storage
Select the steps to store two words
(32-bit data).
(Default: LH Order)
LH Order/HL
Order
Protocol
Select the communication protocol
(Default: UDP/IP) TCP/IP
UDP/IP
Format
Select the communication format.
(Default: 1)
1 to 9
Interrupt Data
Length
Specify the number of bytes of
interrupt data.
(Default: 1)
1/2/4
Special Interrupt
Output
Set whether or not to output the
special interrupt code.
(Default: None)
Yes or No
Existence
check
*2
Set whether or not to perform a
existence check.
(Default: No)
Yes/No
Existence check
sampling
*3
Set the sampling to perform a
existence check.
(Default: 20s)
10 to 100s