Mitsubishi Electric GT14, User Manual

Page: 1164 / 1546

50 - 22
50. CONNECTION TO YOKOGAWA PLC
50.3 Ethernet Connection
50.3.2 GOT side settings

Setting communication interface (Communication
settings)
Set the channel of the connected equipment.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: YOKOGAWA
• Controller Type: STARDOM/FA-M3
• I/F: Interface to be used
• Driver: Ethernet (YOKOGAWA), Gateway
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
50.3.2  Communication detail settings
Click the button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
18.1.2 I/F communication setting

Communication detail settings
Make the settings according to the usage environment.
*1 Click the button and perform the setting in the [GOT
IP Address Setting] screen.
*2 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
50.3.2  Ethernet setting
2.
3.
4.
Click!
OK
Item Description Range
GOT NET No.
Set the network No. of the GOT.
(Default: 1)
1 to 239
GOT PLC No.
*2
Set the station No. of the GOT.
(Default: 1)
1 to 64
GOT IP Address
*1
Set the IP address of the GOT.
(Default: 192.168.3.18) 0.0.0.0 to
255.255.255.255
Subnet Mask
*1
Set the subnet mask for the sub
network. (Only for connection via
router) If the sub network is not
used, the default value is set.
(Default: 255.255.255.0)
0.0.0.0 to
255.255.255.255
Default Gateway
*1
Set the router address of the
default gateway where the GOT is
connected. (Only for connection
via router) (Default: 0.0.0.0)
0.0.0.0 to
255.255.255.255
Ethernet
Download Port
No.
*1
Set the GOT port No. for Ethernet
download. (Default: 5014)
1024 to 5010,
5014 to 65534
(Except for 5011,
5012, 5013, and
49153)
GOT
Communication
Port No. Set the GOT port No. for the
connection with the Ethernet
module. (Default: 5017)
1024 to 5010,
5014 to 65534
(Except for 5011,
5012, 5013, and
49153)
Retry
Set the number of retries to be
performed when a communication
timeout occurs.
When receiving no response after
retries, the communication times
out. (Default: 3times)
0 to 5times
Startup Time
Specify the time period from the
GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
3 to 255 sec
Timeout Time
Set the time period for a
communication to time out.
(Default: 3sec)
3 to 90sec
Delay Time
Set the delay time for reducing the
load of the network/destination
PLC. (Default: 0ms)
0 to 10000
(× 10 ms)