Mitsubishi Electric GRANDIS OXPE10E1, Owner'S Manual

Page: 159 / 273

l If no station is found with your desired PTY,
the display will show “EMPTY” for about 5
seconds and the radio will return to the previ-
ous station.
How to enter PTYs in the memory
E00721400122
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6)
to tune the PTY to be entered in the memory.
2. Press one of the memory select buttons (3)
for 2 seconds or longer. The sound will be
momentarily interrupted while the PTY is be-
ing entered into the memory. The number of
the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by
pressing the button and then releasing it with-
in about 2 seconds.
To change the language of PTY display
E00721500181
You can select your favourite language among Eng-
lish, French, German, Swedish, Spanish and Italian.
1. Press the “MENU” button (A) to select the
language of PTY display mode.
Refer to “Function setup mode” on page
5-21.
2. Press the audio adjust button (B) to select a
language.
NOTE
l After selecting a mode, you can leave the func-
tion setup mode by taking either of the fol-
lowing steps:
• Press the “MENU” button for at least 2
seconds.
• Make no entry for 7 seconds.
Traffic information
E00721600179
The radio will automatically tune in to traffic infor-
mation broadcasts while receiving FM broadcasts
or playing compact discs.
To select this function, follow the instructions below.
1. Press the TP button (7). The display will
show “TP” (12). If the RDS data can be read,
the display will show “RDS” (10). If not, the
display will show “NO RDS” for about 5 sec-
onds.
2. If the radio detects traffic information on ei-
ther the station currently selected or another
station, the display will show “TRAF INF”
for 5 seconds followed by a 2-second indica-
tion of the frequency. Then, it will show the
name of the station broadcasting the traffic in-
formation to which you will listen. The vol-
ume level is set separately for listening to nor-
mal audio programs and for listening to traf-
fic information. The volume level will there-
fore change automatically to that set when
traffic information was last received. When
the traffic information broadcast is over, the
radio will return to the previously received
program and to the corresponding volume lev-
el.
3. Press the TP button (7) to return to the previ-
ous condition.
NOTE
l While “TP” is illuminated, the radio stops on-
ly at TP stations even if the TUNE/SEEK but-
ton (5 or 6) is pressed.
For pleasant driving
5-20
5