Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 86 / 292

11 - 16
11.4 Communication Monitor
11.4.3 Screen display content
(1) Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
(2) Communication status
Displays the communication status of each communication port.
The SD and RD symbols appear in white on red (
, ) while data are being sent or received, and in black on
gray ( , ) at other times. They may appear lit depending on the communication status.
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
Setting example
(a) [During normal communication (with connection to a device that supports the transparent mode)]
(b) [When the connecting cable with the controller is disconnected]
Display item Channel number Remark
PLC Ch1 "PLC" appears when connected to a controller (PLC or microcomputer)
Barcode Ch8 "BCR" appears when connected to a bar code reader
TRANS. Ch9
"TRANS." appears when the controller that is allocated to one of the
communication ports supports the transparent mode
"TRANS." automatically changes to "PC" when communicating with drawing
software
Host(PC) Ch9
"PC" appears when the controller that is allocated to one of the communication
ports does not support the transparent mode
Printer ChA Appears when connected to a printer.
Port Channel number Controller type
I/F-1 Ch1 MELSEC-FX
I/F-2
Ch8
,
Ch9
-
(1) (3)
(2)
The SD and RD symbols for I/F-1
Only the SD symbol next to I/F-1 blinks.