![Mitsubishi Electric FX3S-10M series User Manual Download Page 77](http://html.mh-extra.com/html/mitsubishi-electric/fx3s-10m-series/fx3s-10m-series_user-manual_238942077.webp)
71
FX
3S
Series Programmable Controllers
User's Manual - Hardware Edition
1
Introduc
tion
2
Features an
d
Par
t N
am
es
3
Produc
t
Introducti
on
4
Specifi
cations
5
Ve
rsi
on and
Peri
pheral
De
vice
s
6
Sy
stem
Confi
gurati
on
7
Instal
lati
on
8
Preparati
on an
d
Pow
er Supply
Wi
ring
9
Input W
iri
ng
10
Hi
gh
-S
peed
Counters
8 Preparation for Wiring and Power Supply Wiring Procedures
8.3 Grounding
8.3
Grounding
Ground the PLC as stated below.
• Perform class D grounding. (Grounding resistance: 100
Ω
or less)
• Ground the PLC independently if possible.
If it cannot be grounded independently, ground it jointly as shown below.
Extension devices of PLC (except expansion board and special adapter)
• Use ground wires thicker than AWG14 (2 mm
2
).
• Position the grounding point as close to the PLC as possible to decrease the length of the ground wire.
PLC
Other
equipment
PLC
Other
equipment
PLC
Other
equipment
Shared grounding
Good condition
Common grounding
Not allowed
Independent grounding
Best condition
Main unit
Other
equipment
Special
adapter
Expansion
board
PLC
Independent grounding
Class D grounding
(grounding resistance: 100
Ω
or less)