3 Driver Installation
3.3 Installation procedure
25
FX-USB-AW/FX
3U
-USB-BD USER'S MANUAL
USB Driver Installation Edition
1
O
utl
ine an
d
Specifi
cations
2
System
Config
and C
onnecting
Procedure
3
Dri
ver
Install
ation
4
Ins
tallati
on
C
onfi
rma
tion of
Dr
ive
r
5
U
nin
stall
ing
Dr
ive
r
6
Cauti
on on U
se
7
Tro
ubl
eshooti
ng
3.3.3
Windows 7
•
USB driver Ver. 1.30 or later is applicable to Windows
7 32-bit version.
•
USB driver Ver. 1.40 or later is applicable to Windows
7 64-bit version.
Please install the driver with the following procedure.
The installation procedure is explained when connecting a personal computer with Windows
7 to the FX-
USB-AW.
Caution
•
Two driver installations are necessary, "USB driver software" and "USB Serial Port", are both required.
Communication is not possible with only one of the two. Please perform both installations with reference to
the following procedures.
1) When the USB cable is connected to the personal computer, the message "Installing device driver
software" appears, and then the message "Device driver software was not successfully installed"
appears.
Clicking [ Click here for details. ] does not enable installation.
Click [ X ] at the upper right corner to close this message.
2) Click [ Start ]
→
[ Control Panel ]
→
[ System and Security ]
→
[ Device Manager ] to start up Device
Manager and display the following screen.
Put the cursor on [
FX-USB-AW ] in [ Other devices ], double-click or right-click it, and select
[ Properties ].
Or put the cursor on [
FX-USB-AW ], right-click it, and select [ Update Driver Software... ] to omit steps
3) and 4) and jump to step 5).
(For the FX
3U
-USB-BD, that model name is displayed.)
