Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 923 / 940

Appendix Ethernet communication parameters (functions) and instruction codes under different control methods
FR-F800 A - 23
A.4 Ethernet communication parameters (functions) and
instruction codes under different control methods
The following table shows the Ethernet communication parameters (FR-F800-E only), the corre-
sponding instruction codes, and the availability of the parameters by control method.
Instruction codes are used to read or write parameters through the Ethernet network (Modbus®/
TCP or CC-Link IE Field Network Basic).
(Refer to page 5-593 for the details of the Modbus®/TCP, and to page 5-610 for the details of the
CC-Link IE Field Network Basic.)
Function availability under each control method is shown as below:

: Available
×: Not available
For "parameter copy", "parameter clear", and "all parameter clear", the function availability is
indicated as follows:

: Available
×: Not available
Communication parameters that are not cleared by Parameter clear (All parameter clear) through
the Ethernet network (Modbus/TCP or CC-Link IE Field Network Basic).
(Refer to page 5-593 for the details of the Modbus®/TCP, and to page 5-610 for the details of the
CC-Link IE Field Network Basic.)
Pr. Name
Instruction code Control method Parameter
Read Wr
it
e
Ex
te
nd
ed
Co
p
y
Cle
a
r
A
ll cl
ear
1124 Station number in inverter-to-inverter link 18 98 B
     
1125
Number of inverters in inverter-to-inverter link
system
19 99 B
     
1424 Ethernet communication network number 18 98 E
     
1425 Ethernet communication station number 19 99 E
     
1426 Link speed and duplex mode selection 1A 9A E
     
1427 Ethernet function selection 1 1B 9B E
     
1428 Ethernet function selection 2 1C 9C E
     
1429 Ethernet function selection 3 1D 9D E
     
1431 Ethernet signal loss detection function selection 1F 9F E
     
1432 Ethernet communication check time interval 20 A0 E
     
1434 Ethernet IP address 1 22 A2 E
     
1435 Ethernet IP address 2 23 A3 E
     
1436 Ethernet IP address 3 24 A4 E
     
1437 Ethernet IP address 4 25 A5 E
     
1438 Subnet mask 1 26 A6 E
     
1439 Subnet mask 2 27 A7 E
     
1440 Subnet mask 3 28 A8 E
     
1441 Subnet mask 4 29 A9 E
     
1442 Ethernet IP filter address 1 2A AA E
     
1443 Ethernet IP filter address 2 2B AB E
     
1444 Ethernet IP filter address 3 2C AC E
     
1445 Ethernet IP filter address 4 2D AD E
     
1446 Ethernet IP filter address 2 range specification 2E AE E
     
Tab. A-4: Parameter list with instruction codes for Ethernet communication(1)
V/FV/FV/F
Magnetic fluxMagnetic fluxMagnetic flux
PMPMPM