Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 152 / 940

Frequently-used parameters (simple mode parameters) Basic operation
4 - 12
Initial value for the FR-F820-00046(0.75K) or lower and FR-F840-00023(0.75K) or lower.
Initial value for the FR-F820-00077(1.5K) to FR-F820-00167(3.7K) and the FR-F840-00038(1.5K) to
FR-F840-00083(3.7K).
Initial value for the FR-F820-00250(5.5K), FR-F820-00340(7.5K), FR-F820-00126(5.5K), and FR-F840-
00170(7.5K).
Initial value for the FR-F820-00490(11K) to FR-F820-01540(55K), FR-F820-00250(11K) to
FR-F840-00770(37K).
!
Initial value for the FR-F820-01870(45K), FR-F820-02330(55K), FR-F840-00930(45K), and FR-F840-
01160(55K).
Initial value for the FR-F820-03160(75K) or higher and FR-F840-01800(75K) or higher.
$
For the FR-F820-02330(55K) or lower and FR-F840-01160(55K) or lower.
%
For the FR-F820-03160(75K) or higher and FR-F840-01800(75K) or higher.
"
Initial value for the FR-F820-00340(7.5K) or lower and FR-F840-00170(7.5K) or lower.
#
Initial value for the FR-F820-00490(11K) or higher and FR-F840-00250(11K) or higher.
FM denotes the initial value for the FM type inverter that has the terminal FM, and CA denotes the
initial value for the CA type inverter that has the terminal CA.
7 F010 Acceleration time 0.1 s
5 s
"
0–3600 s Sets the acceleration time.
5-102
15 s
#
8 F011 Deceleration time 0.1 s
10 s
"
0–3600 s Sets the deceleration time.
30 s
#
9
H000
C103 Electronic thermal
O/L relay
0.01 A
$
Rated
inverter
current
0–500 A
$
Protects the motor from heat.
Set the rated motor current.
5-150
0.1 A
%
0–3600 A
%
79 D000
Operation mode
selection
1 0 0–4, 6, 7
Select the start and frequency command
sources.
5-119
125 T022
Terminal 2
frequency setting
gain frequency
0.01 Hz 60 Hz 50 Hz 0–590 Hz
Allows the frequency at the maximum
potentiometer setting (5 V in the initial
setting) to be changed.
4-27,
5-266
126 T042
Terminal 4
frequency setting
gain frequency
0.01 Hz 60 Hz 50 Hz 0–590 Hz
Allows the frequency at the maximum
current input (20 mA in the initial setting)
to be changed.
4-29,
5-266
160 E440
User group read
selection
1 9999 0 0, 1, 9999
Restricts the parameters that are read by
the operation panel and the parameter
unit.
5-85
998 E430
PM parameter
initialization
1 0
0, 12, 14,
112, 114,
8009, 8109,
9009, 9109
Selects the PM motor control and set the
parameters that are required to drive a PM
motor.
5-48
999 E431
Automatic
parameter setting
1 9999
1, 2, 10, 11,
12, 13, 20,
21, 30, 31,
9999
Changes parameter settings as a batch. The
target parameters include communication
parameters for the Mitsubishi's human
machine interface (GOT) connection and
the parameters for the rated frequency
settings of 50 Hz/60 Hz.
5-80
Pr.
Pr.
group
Name Unit
Initial value
Range Application
Refer
to
page
FM CA
Tab. 4-9: Simple mode parameters (2)