Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 506 / 608

CC-Link IE Field Network Basic Parameter
6 - 352
– Remote register
햲
The above 8 bit is always H00 even if a value other than H00 is set.
햳
When Pr. 37 is not equal to "0", this will be machine speed display (1 increments).
햴
"n" indicates a value determined according to the station number setting.
●
When Pr. 544 = "1" (compatible with CC-Link Ver.1)
– Remote I/O (32 points)
Same as when Pr. 544 = 0 (Refer to page 6-351.)
– Remote register
햲
When Pr. 37 is not equal to "0", this will be machine speed display (1 increments).
햳
"n" indicates a value determined according to the station number setting.
Address
햴
Description
Refer to
page
Upper 8 bits Lower 8 bits
RWwn Monitor code 2 Monitor code 1 6-358
RWwn+1 Set frequency (0.01 Hz increments)
햳
6-358
RWwn+2 H00 (arbitrary)
햲
Instruction code 6-358
RWwn+3 Write data 6-358
Tab. 6-146: Remote write register
Address
햴
Description
Refer to
page
Upper 8 bits Lower 8 bits
RWrn First monitor value 6-359
RWrn+1 Second monitor value 6-359
RWrn+2 Reply code 6-359
RWrn+3 Read data 6-359
Tab. 6-147: Remote read register
Address
햳
Description
Refer to
page
Upper 8 bits Lower 8 bits
RWwn Monitor code 2 Monitor code 1 6-358
RWwn+1 Set frequency (0.01 Hz increments)
햲
6-358
RWwn+2
Link parameter
extended setting
Instruction code 6-358
RWwn+3 Write data 6-358
Tab. 6-148: Remote write register
Address
햳
Description
Refer to
page
Upper 8 bits Lower 8 bits
RWrn First monitor value 6-359
RWrn+1 Second monitor value 6-359
RWrn+2 Reply code 2 Reply code 1 6-359
RWrn+3 Read data 6-359
Tab. 6-149: Remote read register