Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 446 / 608

Communication operation and setting Parameter
6 - 292
6.19.8 USB communication (Pr. 547, Pr. 548)
Inverter setup can be easily performed using the FR Configurator by connecting the inverter and per-
sonal computer with a USB cable. A personal computer and inverter can be easily connected with one
USB cable.
햲
Changed setting value is made valid when powering on or resetting the inverter.
You can perform parameter setting and monitoring with the FR Configurator. Refer to the instruction
manual of the FR Configurator for details.
Pr. No. Name Initial Value Setting Range Description Parameters referred to
Refer to
Section
547
USB communication station
number
햲
0 0–31 Inverter station number specification
551 PU mode operation
command source selection
6.18.3
548
USB communication check
time interval
햲
9999
0
USB communication is possible
Trips in the PU operation mode (E.USB)
0.1–999.8 s
Sets the interval of communication check time. If a
no-communication state persists for longer than
the permissible time, the inverter will come to trip
(E.USB).
9999 No communication check
Specification Description
Interface Conforms to USB1.1
Transmission speed 12 Mbps
Wiring Length 5 m
Connector USB mini B connector (receptacle mini B type)
Power supply Self-power supply
Tab. 6-111: USB communication specifications
I001921E
Fig. 6-145: Connection to the USB connector
USB cable USB connector
How to open the USB connector cover
Pull the cover in the direction of arrow.
Then turn it upward.