Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 107 / 608

Operation Operation panel
FR-E700 SC EC/ENE 4 - 15
4.3.5 Monitoring of output current and output voltage
Monitor display of output frequency, output current and output voltage can be changed by pushing
the SET key during monitoring mode.
4.3.6 First priority monitor
Hold down the SET key for 1 s to set monitor description to be appeared first in the monitor mode. (To
return to the output frequency monitor, hold down the SET key for 1 s after displaying the output fre-
quency monitor.)
4.3.7 Digital dial push
Appears when PU operation mode or external/PU combined operation mode 1 is selected (Pr. 79 =
"3").
Push the digital dial to display the set frequency currently set.
I001740E
Fig. 4-10: Monitoring of output current and output voltage
Fig. 4-11:
Display the set frequency currently set
I001067E
햲
Press the MODE key during operation to choose
the output frequency monitor.
(Hz indication is lit.)
햳
Independently of whether the inverter is running
in any operation mode or at a stop, the output
current monitor appears by pressing the SET key.
(A indication is lit.)
햴
Press the SET key to show the output voltage
monitor.
(Hz and A indication are turned off.)
Operation Display