39
5
5.2 Input to the inverter from the network
Main items which can be commanded from the network to the inverter and their descriptions are explained below.
NOTE
• Refer to the Instruction Manual (Detailed) of the inverter for functions controllable from the network in each operation
mode.
Item
Description
Refer to page
Frequency setting
Set the running frequency of the inverter.
Operation mode write
Set the operation mode of the inverter.
Run command
Set the control input command such as forward operation signal (STF) and reverse
rotation signal (STR).
Inverter reset
Reset the inverter.
Parameter write
Set parameters of the inverter.
Parameter clear
Return parameters to the initial values.
