Mitsubishi Electric FR-A700 EC, Instruction Manual

Page: 501 / 826

Parameter Monitor display and monitor output signals
FR-A700 EC 6 - 321
6.15.2 DU/PU monitor display selection (Pr. 52, Pr. 54, Pr. 158, Pr. 170, Pr. 171,
Pr. 268, Pr. 563, Pr. 564, Pr. 891)
The monitor to be displayed on the main screen of the operation panel (FR-DU07)/parameter
unit (FR-PU04/FR-PU07) can be selected.
In addition, signals to be output from the terminal CA (analog current output) and AM (analog
voltage output) can be selected.
The above parameters allow its setting to be changed during operation in any operation
mode even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
Pr.
No.
Name
Initial
Value
Setting
Range
Description Parameters referred to
Refer to
Section
52
DU/PU main display data
selection
0
(output
frequency)
0/5–14/
17–20/
22–25/
32–35/
50–57/100
Select the monitor to be displayed on the
operation panel and parameter unit. Refer
to Tab. 6-92 for monitor description.
37
144
55
56
866
291
Speed display
Speed setting
switchover
Frequency
monitoring
reference
Current
monitoring
reference
Torque monitor-
ing reference
Pulse train I/O
selection 6.15.1
6.15.1
6.15.3
6.15.3
6.15.3
6.15.4
54
CA terminal function
selection
1
(output
frequency)
1–3/5–14/
17/18/21/
24/32–34/
50/52/
53/70
Select the monitor output to terminal CA.
158
AM terminal function
selection
Select the monitor output to terminal AM.
170
Watt-hour meter clear 9999
0
Set "0" to clear the watt-hour meter
monitor.
10
Set the maximum value when monitoring
from communication to 0 to 9999kWh.
9999
Set the maximum value when monitoring
from communication to 0 to 65535kWh.
171
Operation hour meter
clear
9999 0/9999
Set "0" in the parameter to clear the watt-
hour monitor.
Setting "9999" has no effect.
268
Monitor decimal digits
selection
9999
0 Displays as integral value.
1 Displayed in 0.1 increments.
9999 No function
563
Energizing time
carrying-over times
0
0–65535
(reading
only)
The numbers of cumulative energizing
time monitor exceeded 65535h is dis-
played.
Reading only
564
Operating time carrying-
over times
0
0–65535
(reading
only)
The numbers of operation time monitor
exceeded 65535h is displayed.
Reading only
891
Cumulative power
monitor digit shifted
times
9999
0–4
Set the number of times to shift the
cumulative power monitor digit.
Clamp the monitoring value at maximum.
9999
No shift
The monitor value is cleared when it
exceeds the maximum value.