manualshive.com logo in svg

Mitsubishi Electric DX-TL16U, User Manual, Page: 53 / 89

Share
Download
Mitsubishi Electric DX-TL16U User Manual Download Page 53

Digital Video Recorder 

 41

 
 

 Audio 

─

 The icon   displays on each camera screen for which the DVR can play live audio. 

 PTZ 

─

 The icon 

 displays on each PTZ camera screen.

 

 Text-In 

─

 The text input strings display on the screen.  You can adjust the 

Display Dwell

 time (sec.) for the 

text input strings displayed on the screen.

 

 

You can adjust the transparency of the setup screens by highlighting 

Transparency 

and using the Left and 

Right arrow buttons. 

 

Highlighting 

OSD Margin…

 and pressing the 

 button displays how 

OSD text will be displayed on the monitor. 

 

You can adjust the horizontal and vertical margins so that text and icons 
will not be hidden beyond the edges of the monitor. 

 

 

You can save your OSD settings by highlighting 

Save

 and pressing the 

 button.  Selecting 

Cancel

 exits 

the screen without saving the changes. 
 

Main Monitor Settings (DISPLAY 

 Main Monitor Tab) 

 

 

 

Figure 34 

─

 Main Monitor setup screen. 

 

Highlight the box beside 

Mode

 and press the 

 button.  You can select between Full Sequence and Cameo 

Sequence. 

 

Pressing the 

Sequence

 button causes the DVR to sequence cameras, and the DVR can sequence cameras 

in two modes: “Full” and “Cameo”.  In the Full mode, the DVR sequences through the cameras and displays 
them full screen.  In the Cameo mode, the bottom right window in a multi-screen format sequences through 
the cameras. 

 

NOTE:  Any cameras that are Off, have lost video or are set to Covert (unless the user has authority 
to view covert cameras) will be excluded from the Cameo sequence. 

 

You can define the screen layout in a variety of formats and set the DVR to sequence through the different 
screen layouts (pages) so that all the cameras will be displayed.  You can also set up the DVR to display 
one camera or a group of cameras all the time while cycling through the remaining cameras in a “cameo” 
window.  This can be done with one camera displayed full screen while displaying the cameo window as a 
PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right window as the cameo. 

 

NOTE:  Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 
8-channel DVR. 

 

Highlight the box beside 

Interval

 and press the 

 button.  You can adjust the display dwell time for each 

camera displayed on the main monitor.

 

Summary of Contents for DX-TL16U


























































































Reviews:

No comments