- 7 -
7) Product failure due to any other cause which is not the responsibility of Mitsubishi, or failures
which the customer recognizes as not the responsibility of Mitsubishi.
Fee-Charged Warranty Period after Production Discontinuation
Mitsubishi shall accept products for fee-charged repairs for a period of seven years after production
of that product has been discontinued. However, discontinued products cannot be newly provided or
replaced.
Lost Opportunity and Secondary Loss Disclaimer
Regardless of the warranty period, Mitsubishi bears no responsibility for losses incurred by the
customer from causes which are not the fault of Mitsubishi. Moreover, Mitsubishi shall bear no
responsibility for the following:
* A customer's lost opportunities or profit losses caused by a product failure.
* Losses caused by special conditions, regardless of whether or not Mitsubishi could have foreseen
those conditions.
* Secondary damage and accident compensation.
* Compensation for damage to items other than the Mitsubishi product.
Produce Specification Changes
Specifications listed in catalogs, specification manuals, and technical information may be changed at
any time without prior notice.
Product Application
■
Conditions of use
This Mitsubishi product shall not be used in applications where its failure or malfunction will have
serious consequences, except in cases where an adequate backup system, etc. is provided.
■
Forbidden applications, etc.
(1) This Mitsubishi product was designed and manufactured for general-purpose industrial
applications only. It should not be used in applications such as nuclear power stations, general
power stations, and public transportation (railroads, airlines, etc.) where its operation affects the
public at large, or in vehicles, medical equipment, equipment for recreation and amusement,
safety equipment, combustion systems, and in applications where government or industrial
regulation compliant equipment is used which requires special quality assurance specifications.
(2) This product should also not be used in applications where human life and property are at stake,
and where an especially high level of reliability is required in terms of safety and control system.
(3) Note that even with these applications, if the user approves that the application is to be limited
and a special quality is not required, application shall be possible.
Other
The above content applies to products which are sold and used within Japan.
When you use this product in the other countries, please follow the law of each country (area).
Overseas Service Support Section
：
X903170501A
Issue Date: June, 2020
This document was issued in June, 2020, and its content may be changed at any time without prior notice.
