manualshive.com logo in svg

Mitsubishi Electric DLP XD8100U, User Manual

Share
Download
Mitsubishi Electric DLP XD8100U User Manual Download Page 3

EN-3

Contents

Important safeguards ........................................................................................................................4

Preparing your projector ....................................................................................................................6

Using the remote control ...................................................................................................................9

Setting up your projector .................................................................................................................11

Viewing computer images ...............................................................................................................19

Viewing video images ......................................................................................................................25

Menu operation ...............................................................................................................................31

Adjusting projected images .............................................................................................................42

Initial network settings .....................................................................................................................49

Lamp relay .......................................................................................................................................53

Advanced features ..........................................................................................................................55

Replacing the lamp .........................................................................................................................62

Maintenance ....................................................................................................................................64

Automatic cleaning fi lter ..................................................................................................................65

Troubleshooting ...............................................................................................................................67

Indicators .........................................................................................................................................71

Specifi cations ..................................................................................................................................72

Trademark, Registered trademark

•  DLP™, Digital Micromirror Device, DMD and BrilliantColor™ are all trademarks of Texas Instruments.
•  HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI 

Licensing LLC.

•  Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation 

in the United States and/or other countries.

•  Mac is a registered trademark of Apple Inc. 
•  The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United States, 

and other countries and areas.

•  Roomview is a trademark of Crestron Electronics, Inc.
•  Other brand or product names are trademarks or registered trademarks of their respective holders.

Summary of Contents for DLP XD8100U












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands