EN-24
3. FEATURE menu
ITEM SETTING
FUNCTION
ASPECT
AUTO
Select to change the aspect ratio automatically depending on the input signal.
(Select this option for normal use.)
16:9
This option allows you to select the display position of squeezed (or horizontally
compressed) images stored on DVD discs. By pressing the ENTER button, you
can select the display position among CENTER, UPPER, and LOWER.
REAL
Select to project images in their original size as input. Not available when the
keystone adjustment is applied.
PASSWORD FUNCTION
Use to enable or cancel the password lock. See page 28 for details.
MENU POSITION
2 options
Use to change the position of the menu.
CINEMA MODE AUTO
The fi lm mode will be automatically activated when a fi lm source signal is input.
OFF
The
fi lm mode will not be activated.
VIDEO SIGNAL
8 options
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn’t displayed correctly, select the
desired video format manually.
SET UP
AUTO
Select to change the SET UP mode automatically.
OFF
Select to make black lighter.
3.75%/7.5%
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
tion for U.S. Choose OFF when the image is dark.
SCART INPUT
ON / OFF
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER/COMPONENT VIDEO IN terminal.)
LANGUAGE
10 languages
Use to select the language used in the menus.
RESET ALL
OK
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren
'
t projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren
'
t compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
4. SIGNAL menu
ITEM SETTING
FUNCTION
HORIZ. POSITION
0-999
Use to adjust the horizontal position of the projected image.
VERT. POSITION
0-999
Use to adjust the vertical position of the projected image.
FINE SYNC.
0-31
Use to eliminate fl ickering or blur, if appears, viewing the projected image.
TRACKING
0-9999
Use to eliminate vertical wide stripes, if appears, viewing the projected image.
COMPUTER INPUT
AUTO
The proper setting is automatically selected.
RGB
Select this option if colors aren’t displayed correctly when a high-defi nition video
device having R, G, and B outputs is connected.
YC
B
C
R
/YP
B
P
R
Select this option if colors aren’t displayed correctly when 480p (525p) signal is
input from a DVD player having Y, C
B
, and C
R
component video output terminals
or a high-defi nition digital tuner having Y, P
B
, and P
R
component video output
terminals.
HOLD OFF/ON
Use to adjust the image when fl agging occurs near the top of the screen.
USER OK
CLAMP POSITION 1-63
Use to correct solid white or solid black in the projected image.
CLAMP WIDTH
1-63
Use to correct solid black in the projected image.
VERT.SYNC
AUTO/OFF
Use to adjust the image when its motion doesn't run smoothly. Select AUTO
for normal use.
OVER SCAN
100%-90%
Use to adjust the display area of projected image.
LPF
Use to select whether or not to enable the LPF.
SHUTTER (U)
0-38
Use to adjust the image when noise appears on the top part of the image.
SHUTTER (L)
0-38
Use to adjust the image when noise appears on the bottom part of the image.
SHUTTER (LS)
0-63
Use to adjust the image when noise appears on the left half of the image.
SHUTTER (RS)
0-63
Use to adjust the image when noise appears on the right half of the image.
Menu operation (continued)
