English-15
English
P-2
Installing the monitor (continued)
Carry out as necessary
Installing in the portrait position
The monitor can be installed in the portrait position.
Ensure that the monitor is oriented as shown below.
CAUTION:
• The operating environmental condition (temperature) when
the monitor is in the portrait position is 5˚C to 35˚C.
• Proper operation of the monitor is not guaranteed when it is
not mounted as shown below (upside down, face up, face
down, etc.).
• When mounting an OPS-compliant computer (commercially
available), be sure to set COOLING FAN to ON using
SCREEN SAVER in the CONFIGURATION1 menu of the
OSD screen function. If it is set to AUTO, the life of the
computer may become shorter than that with it set to ON or
the computer may have trouble.
• In the portrait position, the lifetime of the fl uorescent tube
(backlight) is shorter than that when the monitor is in the
landscape position.
Installation in the portrait position
The “
” logo should be on the LEFT side when
viewed from the front of the monitor.
Operation environment for portrait installation
When the monitor is installed in the portrait position, the
following conditions should be satisfi ed.
Temperature 5 - 35°C / 41 - 95°F
Humidity
20 - 80% (without condensation)
Face-up
Face-down
90°
Clockwise
Po
rt
ra
it
Po
rt
ra
it
logo
Landscape
Installing the main power switch cover
Attach the main power switch cover (accessory) and secure
it using a screw as needed, to prevent the main power switch
from being operated.
NOTE:
Once you attach the main power switch cover, you cannot turn
on or off the main power switch.
Screw for securing the
main power switch cover
(accessory)
Main power switch
cover (accessory)
