Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 147 / 200

APPX
Appendix 2 Remote Register
145
A
AnyWireASLINK word input signal
■
Device No.
■ Description
This area automatically stores the word input status of the slave module.
■
Example
For a word input slave module (address: 3) with 2-word data points, the 2 words (RWr23, RWr24) from RWr23 are occupied
for the word input signal because the address is 3.
*1 The occupied area when the setting address of the word input slave module with 2-word data points is 3
Parameter access setting
■
Device No.
■ Description
Specify the parameter access method to a slave module.
When any value other than the above is stored, the operation is set to parameter read (0000H).
Name Device No.
AnyWireASLINK word input signal RWr20 to RWr21F
Input signals Word input information area
RWr20 0
RWr21 1
RWr22 2
RWr23 3
*1
RWr24 4
*1
 
RWr21C 508
RWr21D 509
RWr21E 510
RWr21F 511
Name Device No.
Parameter access setting RWw0
Value Operation
0000H Parameter read (AnyWireASLINK slave module

NZ2AW1GNAL)
0001H Parameter write (NZ2AW1GNAL

AnyWireASLINK slave module)
0002H Remote address change