manualshive.com logo in svg

Mitsubishi Electric AE-200A, Instruction Book

Share
Download
Mitsubishi Electric AE-200A Instruction Book Download Page 169

169

WT07996X02

2-2. Operation

This section explains how to operate each group (see section 2-2-1 “Operating the units”) and all groups collectively 

(see section 2-2-2 “Operating the units in all groups”).

2-2-1. Operating the units

In the group list, click [Advanced settings] to switch to the operation settings screen, which shows the current 

operation status in the “Operation items” and “Other operation status information” areas. Change the desired 

operation items and touch [Send] to reflect the changes. Touch [Cancel] to return to the group list without sending 

any changes.

[1]  Air conditioning unit group

Operation settings screen for air conditioning unit groups is as follows.

If Interlocked LOSSNAY (ventilator) is set, then under the air conditioning unit group operating items will be 

displayed the interlocked LOSSNAY operating items.

Advanced settings

Cancel

Group name

Operation items

Other operation status 

information

Cancel

Operation 

prohibition mark

ON/OFF

Operation mode

Set temperature

Air Direction

Fan Speed

Filter Sign Reset

Interlocked 

LOSSNAY ON/OFF

Interlocked 

LOSSNAY Fan 

Speed

Send

Other operation 

status information

For general users

Chapter 4

Summary of Contents for AE-200A

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands