Mitsubishi Electric A800-E, Instruction Manual

Page: 55 / 84

(N) Operation via communication and its settings
54
PARAMETER
 When Pr.544 = "1" (compatible with CC-Link Ver.1)
• Remote I/O (32 points)
Same as when Pr.544 = 0 (Refer to page 53 .)
• Remote register

For the FR-A800-E, when Pr.804 ="3 or 5" during torque control under Real sensorless vector control or vector control, a torque command value
is set in RWwn+1.

"n" indicates a value determined according to the station number setting.

When Pr.544 = "12" (Compatible with the double setting of CC-Link Ver.2)
• Remote I/O (32 points)
Same as when Pr.544 = 0 (Refer to page 53 .)
• Remote register

For the FR-A800-E, when Pr.804 ="3 or 5" during torque control under Real sensorless vector control or vector control, a torque command value
is set in RWwn+1.

"n" indicates a value determined according to the station number setting.
 When Pr.544 = "14 or 24" (compatible with the quadruple setting of CC-Link Ver.2)
• Remote I/O (32 points (64 points occupied))
Same as when Pr.544 = 0 (Refer to page 53 .)
• Remote register
Address

Description Refer to
page
Address

Description Refer to
page
Upper 8 bits Lower 8 bits Upper 8 bits Lower 8 bits
RWwn Monitor code 2 Monitor code 1 58 RWrn First monitor value 59
RWwn+1
Set frequency (0.01 Hz increments) /
torque command

58 RWrn+1 Second monitor value 59
RWwn+2
Link parameter
extended setting
Instruction code 58 RWrn+2 Reply code 2 Reply code 1 59
RWwn+3 Write data 58 RWrn+3 Read data 59
Address

Description
Refer to
page
Address

Description
Refer to
page
Upper 8 bits Lower 8 bits Upper 8 bits Lower 8 bits
RWwn Monitor code 2 Monitor code 1 58 RWrn First monitor value 59
RWwn+1
Set frequency (0.01 Hz increments) /
torque command

58 RWrn+1 Second monitor value 59
RWwn+2
Link parameter
extended setting
Instruction code 58 RWrn+2 Reply code 2 Reply code 1 59
RWwn+3 Write data 58 RWrn+3 Read data 59
RWwn+4 Monitor code 3 58 RWrn+4 Third monitor value 59
RWwn+5 Monitor code 4 58 RWrn+5 Fourth monitor value 59
RWwn+6 Monitor code 5 58 RWrn+6 Fifth monitor value 59
RWwn+7 Monitor code 6 58 RWrn+7 Sixth monitor value 59
Address

Description Refer to
page
Address

Description Refer to
page
Upper 8 bits Lower 8 bits Upper 8 bits Lower 8 bits
RWwn Monitor code 2 Monitor code 1 58 RWrn First monitor value 59
RWwn+1 Set frequency (0.01 Hz increments) 58 RWrn+1 Second monitor value 59
RWwn+2
Link parameter
extended setting
Instruction code 58 RWrn+2 Reply code 2 Reply code 1 59
RWwn+3 Write data 58 RWrn+3 Read data 59
RWwn+4 Monitor code 3 58 RWrn+4 Third monitor value 59
RWwn+5 Monitor code 4 58 RWrn+5 Fourth monitor value 59
RWwn+6 Monitor code 5 58 RWrn+6 Fifth monitor value 59
RWwn+7 Monitor code 6 58 RWrn+7 Sixth monitor value 59
RWwn+8 Faults history No. H00 58 RWrn+8 Faults history No. Fault data 59
RWwn+9 PID set point (0.01% increments)

58 RWrn+9 Fault record (output frequency) 59
RWwn+A PID measured value (0.01% increments)

58 RWrn+A Fault record (output current) 59
RWwn+B PID deviation (0.01% increments)

58 RWrn+B Fault record (output voltage) 59
RWwn+C
Torque command or torque limit

/
Torque command or torque limit (1st
quadrant)

58 , 63 RWrn+C Fault record (energization time) 59