manualshive.com logo in svg

Mitsubishi Electric 900D-ID, Operation Manual

Share
Download
Mitsubishi Electric 900D-ID Operation Manual Download Page 33

33

Error messages

Causes

Countermeasures

Printer busy

No image for this
MODE

Printer not found

Unknown printer

Please turn off
the power then
turn on with CF
card

DPS not found

Ink type

Unusable format
card

Access problem
1 - 8, 20

Data full 1 - 3

Any button is pressed during data
transfer.

The PRINT button is pressed when
no picture data is stored in the
memory position.

The power is off or a cable is not
connected.

A printer other than CP900DW(ID)
is connected.

The Compact Flash is pulled out
when the power is turned on.

When DPS mode, no USB cable is
connected or the PC is not running.

S-size ink sheet is installed when L-
mode is selected in the menu.

Initial process for CF card insertion.
The format of the card is not
suitable.

Errors concerning the Compact
Flash

Errors concerning the Compact
Flash

Wait until the printing is completed.

Take a picture to store it in the
memory.

Turn on the power or connect the
cable.

Connect with CP900DW(ID).

Turn off the power and insert the
Compact Flash. Then, turn on the
power again.

Connect the USB cable or start up
the PC and start an application
software.

Change to the L-size ink sheet.

Format the Compact Flash by
FAT12 or 16.

Replace the Compact Flash.

Replace the Compact Flash.

Summary of Contents for 900D-ID




































Reviews:

No comments

Brands by name

Popular brands

Load more brands