Mitsubishi Electric 13JZ96, User Manual

Page: 13 / 32

11
*1 The dedicated instructions used in the QnA series and A series programs cannot be used in the QCPU.
Replace them with the FROM/TO instructions.
*2 Only the multidrop link function can be used. (The computer link function (dedicated protocol, nonprocedural
protocol) can no longer be used.)
*3 The number of mountable modules is limited.
*4 Only one of the following modules can be used in the system: QI60 (mounted on the Q3  B, Q5  B, or
Q6  B), A1SI61, AI61, or AI61-S1.
Intelligent communication module A1SD51S
*3
MELSECNET, MELSECNET/B
local station data link module A1SJ71AP23Q, A1SJ71AR23Q, A1SJ71AT23BQ

Paging interface module A1SD21-S1
*3
Position detection module A1S62LS 
PC fault detection module A1SS91

Memory card interface module A1SD59J-S2 
ID interface module A1SD35ID1, A1SD35ID2
*3
MELSECNET-I/O LINK master
module A1SJ51T64 
B/NET interface module A1SJ71B62-S3 
JEMANET (OPCN-1) interface
module A1SJ71J92-S3
*3
S-LINK master module A1SJ71SL92N 
AS-i master module A1SJ71AS92

Blank cover A1SG60 
Dummy module A1SG62

Name Model Number of mountable modules
Computer link module A1SJ71UC24-R4 6 maximum
Intelligent communication module A1SD51S
Paging interface module A1SD21-S1
ID interface module A1SD35ID1, A1SD35ID2
JEMANET (OPCN-1) interface module A1SJ71J92-S3
Interrupt module A1SI61 1
*4
Name Model Remarks