Mitra 3D Mic Pro, Instruction Manual

Page: 15 / 21

3D Mic Pro
can be fi ed on a
3D Mic
Pro
boom pole or any third party boom pole
by using a
3D Mic Pro
shock mount. The
3D Mic Pro
should be hung upside down as
shown in the photograph.
Mitra 3D Mic Boom Pole

Hanging the microphone upside down will laterally invert the 3D sound image. To correct
this, connect the
3D Mic Pro
le XLR output to the right XLR input of the recorder and
3D Mic Pro
right XLR output to le XLR input of the recorder.
If you use a stereo phono cable, then you may not be able to swap the channels like with
a XLR cable. In that case, during post produc on, swap the le and right audio channels in
the audio or video editor. This 3D sound image correc on is necessary beacuse the mic is
hanged upside down.
15