CS45 / CS50 SELECT Chainsaw
11
Original Instructions Version July 16
CS45-50_130716
Safe Handling of Fuel
The engine of the Chainsaw is designed to run on a two stroke oil/fuel mixture.
This fuel is highly flammable; never store cans of fuel or refill the fuel tank in any place where
there is a source of heat or fire, which might ignite the fuel.
Do not smoke whilst operating or reflling the Chainsaw, keep lit cigarettes away from the
Chainsaw at all times.
When refilling the fuel tank always stop the engine first and carefully make sure that there are no
sparks or naked flames anywhere nearby before refuelling.
If any fuel spillage occurs during refuelling, use a dry rag to wipe any fuel which has been spilled
onto the Chainsaw before starting the engine.
After refuelling, screw the fuel cap back tightly onto the fuel tank and carry the Chainsaw to a
spot 5 metres or more away from where it was refuelled before starting the engine.
Two-Stroke Fuel
Fuel is very flammable. Do not smoke or bring any flame or sparks near fuel.
The engine is lubricated by oil mixed into petrol. Prepare a mixture of unleaded petrol and semi-
synthetic two-stroke oil that meets the specifications of: API TC, ISO-L-EGC, JASO FC (Low Smoke)
oil.
Recommended mixing ratio is 40:1.
