26LH-SP Hedgetrimmer
16
Original Instructions Version June 16
26LH-SP_160616
Installing the Hedgetrimmer to the Power Unitt
•
Pull out the locking pin (1) and twist (2) to lock in the outer position (3).
•
Loosen the clamp by turning the handle (4).
•
Insert the attachment shaft, lining up the locking hole with the locking pin .
•
Twist the locking pin (5) to release it from the outer position. You may need to twist the
power unit shaft to ensure that the locking pin engages with the locking hole (6).
•
Tighten the clamp by turning the handle (7).
Clamp
Power Unit
shaft
Locking
hole
Locking pin
1
2
3
4
5
6
7