manualshive.com logo in svg

Mitox 26L, Operator'S Manual, Page: 5 / 64

Share
Download
Mitox 26L Operator'S Manual Download Page 5

26L/U, 33L/U, 43U, 53U

5

Original Instructions Version June 16

Taking Care of Warning Labels

 

 
Always keep warning labels clean and free of scratches, which might make them illegible or     
difficult to read. If the warning labels provided with your Brushcutter become damaged, peel   
off, or otherwise become illegible or difficult to read, order new labels from the authorised  
servicing dealer and replace the damaged labels. When applying new labels, first wipe away any   
dirt and dry the surface before applying the new label in the same place as the original label. 
 
 

Explanation of Symbols on the Machine

 

For safe operation and maintenance, symbols are carved in relief on the machine:

 

  FUEL 

TANK

                           

Fuel tank 2 stroke mix

                          

Position: Fuel cap

 
 

              CHOKE OPERATION

  <RUN>
                         

Starting mode when the engine is hot (choke off).

                         

Position: Air cleaner cover.

  <START>

 

                Starting mode when the engine is cold (choke on).

                         

 Position: Air cleaner cover.

Never modify the cutter in any way. Improper use of any 
cutter can cause serious or fatal injury.

Beware of blade thrust

Summary of Contents for 26L

































































Reviews:

No comments