manualshive.com logo in svg

Mitox 25C SELECT, Operator'S Manual, Page: 20 / 32

Share
Download
Mitox 25C SELECT Operator'S Manual Download Page 20

25C SELECT Grass Trimmer

20

Original Instructions Version June 16

Running In

During the first ten hours of work, avoid running the engine at maximum speed for a prolonged 
period until all the components have bedded in, after the engine has been run in, it will reach its 
maximum power.

Transportation

Never  transport  the  grass trimmer with  the  engine  running. An  engine  that  is  running  
could  be accidently accelerated causing the cutting head to engage.
When carrying by hand, the cutting head should be pointing backwards.
Ensure the grass trimmer is secure when transporting in a vehicle and the tank is drained of fuel.

Maintenance

IMPORTANT

After every use, check that all nuts, bolts and screws are securely fastened and tighten if 
necessary.

In the event of an accident, breakdown or blockage, ensure the engine is turned off before any 
work is carried out to rectify this.
Make sure the engine has stopped and is cool before performing any service to the machine. 
Contact with moving cutting head or hot muffler may result in a personal injury.

Fuel Filter

Every 15 hours of operation, using a wire hook, take the fuel filter from the fuel tank  and clean or 
replace with a new fuel filter.

Storage

• 

Remove the spark plug; pour a small amount of oil into the cylinder.  Rotate the    

 

crankshaft several times using the starting rope in order to distribute the oil.  Put the  

 

spark plug back in.

• 

Remove the fuel from the machine.

Summary of Contents for 25C SELECT

































Reviews:

No comments