8
9
5
CLEANING & GENERAL MAINTENANCE
6
SPECIFICATION
※
If your vehicle has been parked in direct sun light resulting in a considerable
rise in temperature inside the vehicle, allow the unit to cool off before
operating.
CLEANING
Unplug or power off mode before cleaning. Do not use liquid cleaners or
aerosol ceaners. Use a damp cloth for cleaning.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this monitor equipment through
holes as they may touch dangerous voltage points or short-out parts that
could result in a fi re of electric shock. Never spill liquid of any kind on the
product.
SERVICING
Do not attempt to service this system by yourself as opening or removing
covers may eapose you to dangerous voltage or other hazards. Refer all
servicing to qualifi ed service personnel.
Operating temperature
-4
℉
to 122
℉ /
-20
℃
to 50
℃
0.18lb (79.5g)
Minimum illumination
1Lux
Image device (NTSC/PAL)
1/4” IT COLOR CCD Image Sensor
View of angle (H/V/D)
71/47/74 deg
Input Voltage
DC 5V~15V/100mA max @ 12V
Camera Weight
Demension
2.44(W) x 1.18(H) x 1.57(D) inch
62(W) x 30(H) x 40(D) mm
Bottom Rubber ---------------------------------------- 1
Accessories
Screws set ------------------------------------------------ 1
Extension Cable --------------------------------------- 1
4
CONNECTION
CS-110
CAMERA CONNECTOR
1. POWER IN (DC +12V)
2. N.C
3. N.C
4. VIDEO OUT
5. N.C
6. N.C
7. GND
Monitor
(Option)
Extension Cable
15ft (4.6m)
Side Camera
Before making the connection, disconnect the ground terminal of the car battery
to avoid short circuiting.
Before inserting plug, should check pin specifi cation and the plug should insert
to jack or connector fi rmly.
If forced insert wrong direction, it may cause malfunction.
When connect extension cable, turn it right direction as described arrow.
Summary of Contents for 20-CS-110
Page 6: ...MEMO MEMO ...
