Mitel UC360, Administration Manual

Page: 37 / 141

UC360 Configuration
21
LDAP/AD Settings
For corporate directory access, the UC360 will use LDAP. You can configure the LDAP Server
Settings, LDAP Server updates, and the LDAP Translations Plan.
1. Press Settings .
2. Press Advanced.
3. Press System Settings.
4. Press LDAP/AD Settings.
LDAP Server Settings
You can enter the following information below in order to login and retrieve the corporate
directory list:
1. Select LDAP Server Settings.
2. Enter the following information:
- Directory Server IP Address or Host Name
- LDAP Search Directory (see “LDAP Search Directory” on page 22)
- Communication Security Type (None/SSL/StartTLS)
- User Login
- User Password
Note: If the administrator needs to change the LDAP username or password, and the UC360
Contacts database is already populated, they do need to clear the previous data. The UC360
automatically clears the data and loads the Contacts using the new credentials.
Enable/Disable Use Pictures
The Use Pictures option turns on/off pictures displayed in the Contacts application. This is to
support situations where the global contacts database does not have any profile pictures.
The picture size displayed in the Contacts application is restricted to 64 x 48. Therefore, photos
stored in the AD must be resized. You can use one of the following freeware tools to resize the
photos:
Photo upload tool
Name: CodeTwo Active Directory Photos
Link: http://www.codetwo.com/freeware/active-directory-photos/
Photo resize tool
Name: FastStone Photo Resizer 3.1
Link: http://www.faststone.org/FSResizerDetail.htm