Mitel MiVoice 5000, Installation Manual

Page: 10 / 28

6
C
LEANING
I
NSTRUCTIONS
C
HAPTER
3 G
ETTING
S
TARTED
Cleaning Instructions
To clean an EX Controller, wipe with a soft dry cloth.
CAUTION
: Do not use volatile liquids such as benzine and thinner as they can damage the unit's casing.
For resistant markings, wet a cloth with a mild detergent, wring well and then wipe off. Use a dry cloth to
dry the surface.
Mounting Tools and Equipment
Tools
•
Screwdriver as required for attaching brackets to rack
•
ESD wrist strap
•
Earth ground cable
WARNING
: The earth ground cable should be the same size (18 AWG minimum) as the earth cable
of the provided power cord. Otherwise, make sure the earth ground cable meets the standards and
requirements of your local electrical code. The type of the cable is likely to have VW-1 or RT1 mark -
ings on the cable.
Equipment
•
RJ-45 cables for the WAN and LAN connections
•
RJ-11 cable for telephony connections
Connectors and Indicators
NOTE
: The EX Controller is highly customizable in the sense that it may have one or several types of ports,
or none. Therefore the following image may not exactly represent your EX Controlle r.
1 Power cord with the proper
model for the country.
1 Bumpon kit for desktop use.
1 printed Getting Started Guide.
1 black RJ-45 cable for each PRI port.
1 black RJ-45 cable for each
BRI port.
1 grey Ethernet RJ-45 cable.
Task Verified by Date