1/1553-ANF 901 54 Uen E5 2016-05-16
20
D
URING
CALLS
5.2 INTRUSION
Depending on the authorization of your extension there is another option for getting
through to a busy extension. You can use Intrusion which means that you are
connected to the ongoing call after a short tone burst.
To order intrusion when meeting busy
•
Press the Intrusion-key or dial 4.
If intrusion on the called extension is not allowed you will continue to receive busy tone.
Before the intrusion is executed a warning tone is sent to the parties in the ongoing call.
During the time the three parties are connected a warning tone will be heard.
Note:
The warning tone, both before and during the intrusion, can by categorization
be disabled.
5.3
INTRUSION ON A SPECIFIC EXTERNAL LINE
If the external line is busy you can intrude. You can use Intrusion which means that you
are connected to the ongoing call after a short tone burst.
5.3.1 TO
INTRUDE
•
Dial *44*individual external line number# and external destination code (busy
tone).
•
Press the Intrusion-key or dial 4.
5.4 INQUIRY
During the course of an ongoing call, you may call another extension or subscriber.
To use
You have a speech connection on one of the line-keys.
•
Press the Inquiry-key or any idle line-key (Line 1 or 2). The connected party is
automatically parked.
•
Dial the extension/external number.
To revert to original party
•
Press the Clear-key (if you have finished the inquiry).
•
Press the line-key that is parked.
Other features available during inquiry are:
a)
Refer back ( 5.5 Refer back on page 21 ).
b)
Transfer ( 5.6 Transfer on page 21 ).
c)
Conference ( 5.7 Conference on page 21 ).