M
I
V
OICE
4220 L
ITE
(DBC220)
FOR
M
I
V
OICE
MX-ONE
21
1/1553-ANF 901 54 Uen E5 2016-05-16
5.5 REFER
BACK
During inquiry you can switch between the connected party and the calls parked on
Line 1 and Line 2 or Inquiry-key.
To use
•
Press the Line 1 or the Line 2 or the Inquiry-key.
To end
•
Press the Line 1 or the Line 2 or the Inquiry-key.
•
Press the Clear-key.
5.6 TRANSFER
You can transfer a call to another extension (in your exchange or private network),
subscriber or the PBX operator. If you have more than one parked call it will be the last
parked call that will be transferred.
5.6.1
TRANSFER AFTER ANSWER
•
Make an inquiry call (press the Inquiry-key and wait for dial tone).
•
Dial the extension or external number and wait for answer.
•
Announce the call.
•
Press the Transfer-key.
5.6.2 TRANSFER
BEFORE
ANSWER
•
Make an inquiry call (press the Inquiry-key and wait for dial tone).
•
Dial the extension or external number and wait for ringing tone.
•
Press the Transfer-key.
Note:
If the wanted extension is busy or transfer to this extension is forbidden the
transfer will not be executed.
5.7 CONFERENCE
You can establish speech connections with up to seven parties. Only the conference
leader (i.e. the person initiating the conference call) can invoke participants.
Note:
The conference tone can by categorization be disabled.
5.7.1
TO INITIATE A CONFERENCE
•
A call to the first party is established on Line 1-key.
•
Press the Inquiry-key or the Line 2-key.
•
Dial the second party"s extension number (inform about the conference).
•
Press the Conference-key or dial 3.