TD
34/1531-ANF901 43 B1 2016-03-31
Installation Guide
20
NOTE: If NetBIOS is enabled in the network, the address elise-XXXXXXXX can be
used when accessing the product via the network, where XXXXXXXX is the
module key number. The module key number can be found on the license
certificate or on the label on the back of the hardware.
Pre-condition: You have access to the network that product is attached to. If not, see
4.4.2 Access via Management Port
1
Connect the module to the LAN.
2
Enter the product’s IP address or elise-XXXXXXXX, where XXXXXXXX is the
module key number (leading zeros can be excluded).
3
Continue in
4.4.2 ACCESS VIA MANAGEMENT PORT
The management port can be used when product has not got a valid and unique IP
address or when the IP address has been changed, i.e. if product has been moved
from one network to another. It gives access to the product without having access to
the customer’s network.
Figure 11. Connection via Management port
NOTE: The reserved IP address for accessing product via the management port is
“192.5.36.229”. Additionally, a port driver needs to be installed on your computer
to get access via the management port. The driver is located on the product.
The default mode for the management port is Network access but Mass storage is
used to get the required driver for the product. When set to Mass storage, the product
will automatically change to Network access within 10 minutes. By pressing the Mode
button twice, the Management port toggles from Network access to Mass storage and
the other way around.
The Mass storage mode is only used when the driver, required for accessing the
product via the management port, shall be installed. This is only needed the first time
the computer is used for this purpose.
1
Connect a mini-USB type B cable between the USB port on your PC and the
management port on the module.
NOTE: If the required port driver is not installed on the computer, install it now. The
installation differs dependent on the operating system, see either
Install the Port Driver on Windows 7
2
Enter the IP address “192.5.36.229" in a web browser on your computer to
access the product’s web interface.
3
Continue in
Summary of Contents for CPDM3
Page 1: ...CPDM3 INSTALLATION GUIDE ...
